- published: 18 Jun 2014
- views: 971
Production company: Fuglefjellet - http://www.fuglefjellet.no Producer: Toivo Nilsen Director/ Editor: Iver Bostad Cinematographer: Espen Gjelsten Additional camera: Rolf Skjong Motion Graphics: Tore Holmem Music: ABB Copyright notice: Please contact us if you want to use our movies in any commercial purpose.
A power grid on the seabed, over 3,000 meters beneath the ocean surface - the "Subsea Power Grid". At the unique Subsea Technology Center in Trondheim, Siemens researchers are working on an underwater power network that can withstand high pressures of up to 320 bar - for a duration of 20 to 30 years! The prototype of a transformer can already be admired. The components for the first switchgear unit stand at the ready in a clean room - and the Siemens developers are already planning to use variable-speed drives. Some insights into pioneering research in the deep. Learn more: http://www.energy.siemens.com/hq/en/industries-utilities/oil-gas/applications/subsea/
The Secure Infinity Series 2MW generator set, with prime power for the offshore oil and gas industry. Robust design, superior quality containerised turbine generators for an infinite number of features and application engineering combinations. Background A global oil and gas exploration company needed additional power on one of their oil platforms in the Middle East. The challenge The main electrical power supply to this platform is provided via a 33kV subsea cable link of over 40Km. The requirement was to install two new generators of 2MVA (approx.) each, to cater the additional power requirement of full production needed to meet their contractual production agreements. The Solution Dale Power Solutions provided two bespoke secure infinity generator sets, each providing a continuou...
In this INTEGRA Technologies How It Works video, we will briefly cover the operation of the SeaStallion Subsea Bolt Tensioner. Contact us today to learn why SeaStallion’s are the industry’s choices for subsea bolting. 800-779-2658 integratechnologies.com (C) INTEGRA Technologies Limited and INTEGRA Services Technologies, Inc. All Rights Reserved. 2016. Music by BENSOUND
We designed a 3D animation for aquamarine power oyster wave farm located near Lewis. Wave power technology captures energy in nearshore waves and converts it into clean sustainable electricity. View more on: http://www.5sqi.com/ Subscribe to our channel and watch high quality 3d animations. We create computer generated imagery (cgi) provided in still and animation format catering to a wide range of sectors, including: • marine/ subsea/ offshore • renewables/ energy/ oil & gas • engineering/ infrastructure/ transport • modular construction visualisations • commercial/ retail • residential/ architectural visualisations
Formed in April 2013, EC-OG is an employee-owned independent Subsea Engineering services provider. We have developed an innovative, ocean current turbine known as the Subsea Power Hub to produce energy for multiple applications. The Subsea Power Hub will provide power in subsea conditions using a unique patented turbine arrangement. It is easy to install, reliable, cost effective and suitable for remote environments.
Subsea 7 has a market leading portfolio of riser solutions, find out more at www.subsea7.com
This video provides a general introduction pipeline spans and vortex induced vibration (VIV). It covers the issues that may arise from spans of considerable length. Resonance is also covered towards the end of the lecture. Check out our website: http://www.engineeringexamples.net/
Five Square Imagery designed a 3D animation and a few still images for Hammerfest. Tidal stream energy (tidal energy or tidal power) is energy contained in naturally occurring tidal currents which can be extracted and converted into electricity. View more on: http://www.5sqi.com/ Subscribe to our channel and watch high quality 3d animations and visualisation. We create 3d visuals (cgi) provided in still and animation format catering to a wide range of sectors, including: • marine/ subsea/ offshore • renewables/ energy/ oil & gas • engineering/ infrastructure/ transport • modular construction • commercial/ retail • residential/ architectural visualisation
An animation showing a complete overview of the range of ball and taper products that First Subsea do.
The ability to hermetically seperate two areas whilst transmitting mechanical power from one to the other makes these couplings ideal for applications where prevention of cross contamination is essential. eg: hydraulic sectors, dosing systems, compressors, sterilizers, industrial ovens, biotechnology, subsea equipment, pharmaceutical industry, chemical industry, food industry, generators, mixers. ATEX compliance (on request) is yet a further advantage of these power transmission couplings.
Graphical represention of Orcaflex analysis of a subsea manifold being lower to the seabed with the use of a Cranemaster passive heave compensator unit. RED arrow represents load seen by subsea manifold if lowered with a Cranesmaster unit, and BLUE represents the load the that teh manifold would have seen in the same conditions without the Cranemaster unit in place.
525 kV voltage (previous highest installed 320 kV) sets world record more than doubling power flow to 2600 MW (from 1000 MW) and extending range to 1500 km for more cost effective, efficient and reliable underground and subsea transmission while keeping losses to below 5 percent. Major breakthrough for applications like underground HVDC transmission, sub-sea interconnections, offshore wind integration etc. More information: http://new.abb.com/systems/high-voltage-cables/cables/525-kv-extruded-hvdc-cable-system
The Sabella D10 tidal stream turbine is interfaced by MacArtney connectivity For successfully transmitting the harnessed tidal power to the onshore grid, Sabella D10 relies on a total customised subsea connectivity solution from MacArtney.
Tracerco Diagnostics™ Subsea Neutron Backscatter measurement for vapor/liquid interfaces within mid-water arches and buoyancy tanks.
Deep Sea Recovery illustrate the deployment and use of their patented controllable buoyancy system in the guise of a subsea 'fork lift'. Fuelled by liquid nitrogen as a gas source the system offers significant lift and manoeuvrability capability for subsea operations.
Since it purchased Westinghouse' facility in 1999, Siemens has doubled its Charlotte presence and now employs more than 1,500 people from throughout the region. At the end of 2011, the company opened its new gas turbine manufacturing operation that together with its existing steam turbine and generator operations features more than one million square feet of manufacturing space for large power generation equipment. Siemens Energy has been integrally involved in curriculum development at UNC Charlotte's new Energy Production and Infrastructure Center (EPIC), CPCC's Carolinas Energy Training Center, and Apprenticeship 2000, all of which provide training for careers in the energy industry.
An Australian company has been working on a system that uses underwater buoys to convert sea waves into zero-emission energy and desalinated water. Australian firm Carnegie Wave Energy has been developing a system called CETO, which aims to utilise sea waves to generate power. Steel-made buoys that can currently generate 240 kilowatts are the main part of the system. At the Australian naval base HMAS Stirling, three buoys are placed 11 kilometres apart. The buoys are less susceptible to extreme weather damage, while underwater waves are sufficient to generate power. The buoys' pumps drive the high pressure water to an onshore power plant via a subsea pipe. The high pressure water spins the turbines, which then generate zero-carbon electricity. The CETO system can be used to power a des...
Duxvalves produces a wide range of choke and control valves. These valves can be equipped with several types of valve principles (internals) depending on the specific application and considering the process conditions.